MONOCONDUCTOR RAIL, MOBILIS MOVIT
This is the monoconductor system to use for high amperages with as many poles as needed.
Mobile electrification system from 315A up to 450A, even 630A with monoconductor rails
Features and benefits of the monoconductor rail MOBILIS MOVIT
The solution for the high amperage and long applications
You need more than 300A for an especially long line? Try MOBILIS MOVIT!
Build your lines up to 630A and without expansion joint until 250m.
Easy to set up
Select 9 components to get a MOBILIS MOVIT electrified line.
Our web catalog helps you to prepare your inquiry in just a few minutes.
Sistemas modular
This flexible system can be used as well inside as outside.
MOVIT by MOBILIS provides a multiple poles solution for medium or extra long lines.
Easy and safe connection
The stainless tracks and aluminium conductors ensure a better conductivity.
Track of curved shape for an optimized and controlled contact.
Quick and easy assembly
Just clip the bars into the self-aligning sliding hangers.
Safety, reliability, durability
The specific H profile of the rail provides stability to the line and is IP23rated so it is finger safe and resistant to rain.
Upkeep requirements are minimized providing lower installation and lifetime maintenance costs.
MOBILIS MOVIT- for heavy applications
Conductor bar systems MOVIT by MOBILIS are mainly used to deliver power to:
- High intensity cranes and long lines
- Hoists
- Quarries
- Or many other applications inside or outside
In case of use in an area open to the public, additional safety measures should be implemented (protection level IP4X required according to EN60204-32).
Busbar, trolley ... - technical features
Construction
| Profile | PVC sheath – H profile, aluminium conductor |
| Overall dimensions: | See drawing |
| Weight of the rail | 0.81kg/m for 315A ; 1.03kg/m for 450A ; 1.26 kg/m for 630A |
| Length of the line: | Unlimited with expansion joint(s) Expansion joint required if: – L > 250 m for 630A – L > 350 m for 315A and 450A |
| Flame resistance | All plastic materials are self-extinguishing; they pass successfully glowing/hot line tests under 960°C for elements in contact with live parts and V-0 according to UL-94. |
| Conductors material | Aluminium |
| Maximum speed of the trolleys | 600 m/min |
| Endurance | Collectors have been tested to run at least 2000km. |
Terms and conditions of use
| Suitable environment | Category 3 of ISO 2081 (outside mild), inside, outside use under rain or dust. A version with 600h resistance under saline mist is available. Please consult. |
| Applicable standards | EN60439-2, EN61439-6, EN60204-32, CE, UKCA |
| Temperature of use | Standard: -30°C … +55°C |
| Protection index | IP23 according to EN60529 (assemblied line with all required accessories) |
Electrical performances
| Intensities | 315A, 450A, 630A |
| Poles | Unlimited - The ground conductor (PE) is marked on the track by a green-yellow strip. |
| Rated operational and insulation voltage | 750VAC, 50Hz for standard version |
| Protection against short circuits | Icw = 8.5kA / 0.2s IPK = 17kA Other please consult |
| Insulating distance between conductors or between conductors and accessible parts | Distance in the air: 10mm min. Creepage distance: 30 mm min. (according to EN60204-32) |
Intensity according to duty cycle
The intensity of the rail is the minimum admissible value of the rail. According to temperature and duty cycle the admissible value can be higher:
| Temperature of use | Duty cycle | Max. admissible value | ||
| 315A | 450A | 630A | ||
| 35°C | 80% | 440A | 540A | 638A |
| 40°C | 405A | 496A | 580A | |
| 35°C | 100% | 415A | 500A | 570A |
| 40°C | 380A | 460A | 530A | |
English 
Spanish